Product features and main uses:
Single component, low viscosity, transparent, fast curing speed at room temperature, high bonding strength, simple and convenient operation, strong universality, good aging resistance, suitable for bonding small area materials, and has good bonding ability for the vast majority of materials.
Product Features: Low viscosity, low odor, low whitening, fast curing speed
Main application: It can be used for bonding between various substrates, such as rubber, metal, plastic, wood, leather, and can be applied in various manufacturing industries such as electronics, electrical appliances, optics, lighting, machinery, etc.
Typical model technical parameters:
| Product Name |
Product Features |
Table drying time |
Resistant to high and low temperatures |
Viscosity map. s |
Packaging specifications |
Storage conditions/month |
| 401 |
Mainly used for bonding metal, plastic, rubber, fast curing, low odor, low whitening |
10-30S |
-30～90℃ |
Low viscosity |
20g/1kg |
25℃/12 |
| 403 |
Ultra low whitening adhesive for metals, plastics, ceramics, rubber, fast curing, high fluidity, good permeability |
3-10S |
-35～80℃ |
Medium viscosity |
20g/1kg |
25℃/12 |
| 406 |
Specially suitable for rubber materials, as well as wood and plastic, with fast curing, high fluidity, and good permeability |
2~6S |
-30～80℃ |
Low viscosity |
20g/1kg |
25℃/12 |
| 435 |
Medical grade, food grade, especially suitable for ceramics, wood, plastics, low whitening, low odor, hydrolysis resistance, high temperature resistance |
5~15S |
-50～100℃ |
Medium viscosity |
20g/1kg |
25℃/12 |
| 460 |
Especially suitable for bonding plastics, with ultra-low whitening. Ultra low odor, water resistant, high temperature resistant |
10~30S |
-30～100℃ |
Medium viscosity |
20g/1kg |
25℃/12 |
| 486 |
Thick metal adhesive, especially used for bonding metals and nylon, resistant to water and high temperatures |
80~100S |
-50～120℃ |
High viscosity |
20g/1kg |
25℃/12 |
| 496 |
Specially suitable for bonding metals, nylon, magnets, and can also bond plastics and wood for rapid curing |
3~20S |
-30～80℃ |
Medium viscosity |
20g/1kg |
25℃/12 |
| 498 |
Special adhesive for soft rubber, suitable for TPE, TPR, TPU, as well as plastics, with high fluidity, good permeability, and fast curing |
10~15S |
-20～80℃ |
Medium viscosity |
20g/1kg |
25℃/12 |
Usage:
1、 Apply glue on the adhesive side, and after applying the glue, join the object to be bonded together. After 45 seconds, it can be bonded together. Do not touch the object to be bonded at this time because the glue has not completely dried, so as not to affect the effect.
2、 The effect will be better if left at room temperature for several hours. (Best effect after 12 hours)
Precautions:
1、 Glue is easily cured when exposed to moisture and must be sealed and stored in a place away from heat and light. "Best refrigeration effect"
2、 Please seal it properly after use Prevent the glue from solidifying.
3、 Avoid direct contact of glue with the eyes. In case of carelessness, immediately rinse with plenty of water or warm water and seek medical attention at the hospital as soon as possible.
The above products must be sealed and stored in a dry, cool, and dark place, avoiding direct sunlight.
