Product Description:

1750 is a single component UV cured plastic adhesive. Fast curing, good surface drying, high transparency, suitable for bonding most plastic materials such as PC, PMMA, PS, ABS, PVC, PET and other materials.

Adhesive performance:

Curing performance:

1750 requires sufficient ultraviolet energy radiation in the air environment to solidify. The curing rate and curing effect require sufficient light energy, mainly 200-400nm ultraviolet light.

surface drying time：5S

Deep curing time (2mm): 20S

Precautions:

This product has slight irritation to the eyes and skin. If accidentally splashed into the eyes, rinse immediately with plenty of water. If in contact with skin, rinse immediately with soap. Please see a doctor if the situation is severe. Storage: Please store at a dry room temperature of 10-26 degrees Celsius. To prevent contamination of unused glue, unused glue should not be poured back into the original bottle.

Packaging specifications:

50g/bottle 1000g/bottle can be packaged according to user needs

explain:

The data in this article were obtained under laboratory conditions, and due to differences in usage conditions, users need to refer to these data and usage conditions for analysis and experimentation. The company does not guarantee the sale of products or the use of products under specific working conditions, and does not assume any direct, indirect, or accidental liability for losses.