Product Introduction:
DX-9060FIt is a UV and moisture dual curing adhesive, which is initially cured and positioned under UV light; In areas where light cannot reach, it can be cured by moisture for 24 hours.
Typical use:
PEN bonding, protection of flexible wires, fixation and reinforcement of connecting wires, bonding of plastics, bonding of glass and metal materials.
Material properties before curing:
| Project |
Typical values |
| Chemical type |
Acrylic ester |
| Appearance |
Blue transparent liquid |
| Viscosity @25℃, Brookfield , DV2T,cps |
| CP52,3.5r |
11000 |
| CP52,25r |
2100 |
| Shelf life @ 5 ℃, months |
6 |
Typical curing characteristics:
Recommended UV curing
Light source and conditions:
| Metal halide UV lamp, energy, W/in |
300 |
| Light source distance，inches |
4 |
| UVA intensity, mW/cm2 |
566 |
| Curing time, seconds |
5~25 |
Curing depth:
Depth (@ 50mW/cm2 curing for 30 seconds), mm:>6.0
Typical properties of cured material:
DMA and TMA samples were cured under UV+7 days of humidity (room temperature, 50% humidity) conditions.
Hardness, Tg， The modulus increases with moisture reaction.
CTE decreases with moisture reaction.
Physical performance
Hardness (Shore D), initial curing condition: UV 6.4J/cm, moisture curing condition: 100% humidity, @ room temperature
| Initial value, after UV curing |
15 |
| +1 day moisture curing |
20 |
| +2 day moisture curing |
30 |
| +3 day moisture curing |
50 |
| +4 day moisture curing |
67 |
| +5 day moisture curing |
76 |
Thermal expansion coefficient, TMA,/℃:
| Below Tg |
81.5×10 |
| Tg or above |
198×10 |
| Glass transition temperature (TMA), ℃ |
75 |
| Storage modulus (DMA), @ 25 ℃ |
N/mm2 |
2,200 |
| (psi) |
(319,000) |
Precautions:
This product is not suitable for use in pure oxygen and/or oxygen rich environments, and cannot be used as a sealing material for chlorine gas or other strongly oxidizing substances.
Stimulate the eyes and skin, causing skin sensitization. Containing acrylic substances, if in contact with eyes, rinse with water for 15 minutes and seek medical help. Contact with skin, rinse with plenty of soapy water.
Excessive or repeated contact with the skin can cause skin irritation and lead to skin allergies. If skin allergy symptoms occur, stop contact with this product and seek medical help. Avoid contact with skin.
Avoid children from coming into contact with the product.
For safety operation information of this product, please refer to the Material Safety Data Sheet (MSDS).
packing:
Packaging specification: 55CC/piece
Storage:
This product can achieve the longest storage life when stored in a cool and dry place at 2 ℃ -8 ℃.
To avoid contaminating unused glue, do not pour any glue back into the original packaging.
Declaration: This manual is true and reliable. The data can only be used as a reference. We are not responsible for any results obtained by anyone using methods beyond our control. If the customer uses a method of use not mentioned in this manual, the consequences shall be borne by the customer themselves. It is recommended that users conduct experiments based on the data provided in this article before formal use. Customers should be responsible for whether the product meets the usage requirements. Dingxin New Materials explicitly declares that it shall not be liable for any necessary or accidental losses, including losses in terms of profits
