Product Introduction:
17012A is a single component, moderately viscous, UV curable adhesive that dries within a few seconds under a certain wavelength of UV radiation. Excellent moisture resistance and flexibility, suitable for fixing and reinforcing electronic components, and waterproof coating.
Typical use:
TYPE-C fixed reinforcement, etc.
Pre curing characteristics:
| Project |
Typical values |
Scope |
| Appearance |
Transparent liquid |
|
| Chemical composition of base material |
Modified acrylic ester |
|
| Viscosity(mPa.s) 4#12 |
26500 |
24000-28000(GB/T 2794-1995) |
| Densityg/cm |
1.07 |
1.06-1.08 (GB/T 13354-1992) |
Curing characteristics:
Curing using ultraviolet light with an intensity of 40mW/cm2
| Surface debonding time (s) |
12 |
| Curing depth(mm@50s) |
8 |
Characteristics after curing:
| Hardness (Shore D) |
75 |
(GB/T 2411-1980) |
| Tensile strength (MPa, sandblasted steel/glass) |
6.5 |
(GB/T 6329-1996) |
| Water absorption rate(%,24h@25C) |
1.3 |
(GB/T 1034-1998) |
| Working temperature (℃) |
-40-135 |
|
Electrical performance:
| Project |
Testing method |
Numerical value |
| dielectric constant（1MHz） |
(GB/T 1409-2006) |
3.4 |
| Dielectric loss (1MHz) |
(GB/T 1409-2006) |
0.03 |
| dielectric strength（KV/mm） |
(GB/T 1408.1-1999) |
24 |
| Surface Resistivity（Ω） |
(GB/T 1410-2006) |
6.5×10 |
| Volume resistivity（Ω） |
(GB/T 1410-2006) |
8.5×10 |
Instructions for use:
The adhesive application area must be cleaned of oil stains and thoroughly cleaned.
It is necessary to use a 365nm ultraviolet lamp for irradiation to confirm that the ultraviolet rays can penetrate the bonding area.
The curing speed depends on the intensity of ultraviolet radiation, the distance between the light source and the adhesive layer, and the required curing depth.
After use, the lid must be immediately closed.
Black rubber hose must be used for adhesive application.
Precautions:
Keep away from children.
Do not pour the poured glue back into the original packaging to avoid contaminating the glue.
This product contains methyl methacrylate, which has a stimulating effect on the skin and eyes. If accidentally in contact with eyes and skin, immediately rinse with clean water and go to the hospital for examination.
Please refer to the MSDS of this product for detailed information.
Packaging specifications:
1KG/bottle 20KG/barrel
Storage conditions:
Store in a cool and dry place at 5-28 ℃. Do not be exposed to ultraviolet or sunlight. Storage period: twelve months.
Explanation: This data was measured by technicians from Dongguan Dingxin New Materials Technology in the laboratory, striving for accuracy and providing some reference value for customers' use. Due to differences in usage conditions, users should refer to these data and usage conditions for analysis and testing. Our company does not guarantee any problems arising from the use of this product beyond specific operating conditions, and does not assume any direct, indirect, or accidental liability for losses. If you have any questions, please contact Dongguan Dingxin New Material Technology Co., Ltd. Technical Service 15920255718.
