Product Introduction：

DX-3506 is a high-strength acrylate structural adhesive. It has a two-component 10:1 system, medium viscosity, fast curing speed (25 ℃, 10min), and an operation time of 6 minutes. After curing, it is hard and tough, with high bonding strength and impact resistance, and good aging resistance and solvent resistance.

Typical use:

Suitable for fixing and bonding various low surface and difficult to stick materials such as PP, PE, PA, etc.

Pre curing characteristics:

Component A:

Component B:

Mixed characteristics:

Characteristics after curing:

Precautions:

Keep away from children.

It is recommended to use it in a well ventilated area.

If it accidentally comes into contact with the skin, wipe it first and then rinse it with clean water.

If it accidentally comes into contact with the eyes, immediately rinse with clean water and go to the hospital for examination.

Please refer to the MSDS of this product for detailed information.

Packaging specifications:

50ml

Storage conditions:

Store in a cool and dry place at 8-28 ℃. Do not be exposed to ultraviolet or sunlight.

Storage period: 12 months.

explain:

The data in this article were obtained under laboratory conditions, and due to differences in usage conditions, users need to refer to these data and usage conditions for analysis and experimentation. The company does not guarantee the sale of products or the use of products under specific working conditions, and does not assume any direct, indirect, or accidental liability for losses.