Product Introduction：

Dingxin DX-3505 is a low odor two-component acrylate adhesive. It is combined according to the volume ratio of 10:1, and the working time is about 4 minutes. DX-3505 has medium viscosity, fast curing at room temperature (25 ℃, 5-6 min), fast bonding and fixation, hard and tough after curing, high bonding strength and impact resistance, good aging resistance and solvent resistance.

Typical use:

Suitable for quick fixing and bonding of metals, hard plastics, composite materials, glass, etc., especially suitable for bonding of phone and laptop shells, screens, and keyboard frames, and suitable for high-speed production lines in electronic factories.

Pre curing characteristics:

Component A:

Component B:

Mixed characteristics:

Characteristics after curing:

Curing speed curve chart:

Precautions:

Keep away from children.

It is recommended to use it in a well ventilated area.

If it accidentally comes into contact with the skin, wipe it first and then rinse it with clean water.

If it accidentally comes into contact with the eyes, immediately rinse with clean water and go to the hospital for examination.

Please refer to the MSDS of this product for detailed information.

Packaging specifications:

50ml,250ml,490ml

Storage conditions:

Store in a cool and dry place at 8-28 ℃. Do not be exposed to ultraviolet or sunlight.

Storage period: 12 months.

explain:

The data in this article were obtained under laboratory conditions, and due to differences in usage conditions, users need to refer to these data and usage conditions for analysis and experimentation. The company does not guarantee the sale of products or the use of products under specific working conditions, and does not assume any direct, indirect, or accidental liability for losses.